Emzer EMSCOPE
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
Modal Measurements:
- Real-time results (FFT)
- Common- and Differential-Mode measurements
- Speeds up RF filter design and problem solving
- Better device under test (DUT) characterization
- Ideal for R&D
Software included
- Embedded software with free updates, no installation is required
- Allows EMI and Modal measurements
- Waterfall function included
- Automatic compliance test report (csv, pdf, image)
- Easy results comparison features
- Pre-set EMC measurements settings
- Oscilloscope mode (optional)
Models:
EMSCOPE
A fully integrated system for complete measurements of conducted emissions up to 110 MHz. Fast and accurate EMI measurements and innovative Modal measurements (common and differential mode) for an effective filter design.
Integrates all items inside one single box:
- 2 channel FFT receiver
- 2 channel 16A single phase LISN
- Pulse limiter 5W
- Software
- Fiber-optic communication
EMSCOPE-RX
A double channel receiver for complete measurements of conducted emissions up to 110 MHz. Fast and accurate EMI measurements and innovative Modal measurements (common and differential mode) for an effective filter design.
Integrates all items inside one single box:
- 2 channel FFT receiver
- Pulse limiter 5W
- Software
- Fiber-optic communication
EMSCOPE-RX4
Four EMI receivers for conducted emissions and modal measurements of three-phase EUTs.
Integrates all items inside one single box:
- 4 channel FFT receiver
- Pulse limiter 5W
- Software
- Fiber-optic communication
In addition available:
LIZN
Double channel LISN for simultaneous measurements of line and neutral.
16-A single-phase dual-port line impedance stabilization network.
LISN is a new Line Impedance Stabilization Network fully compliant to CISPR16-1-2 that facilitates the simultaneous measurement in both lines and the extraction of common- and differential-mode
Datasheet
EMZ10-200M
Transient Limiter for instrument protection.
A 200-MHz 5-W Transient Limiter for instrument protection.
EMZ10-200M is a new transient limiter which includes an attenuator and a high pass filter. A transient limiter is a nonnegotiable piece of equipment that should be used in combination with a Line Impedance Stabilization Network to protect the input circuit of spectrum analyzers and measurement receivers.
Datasheet
Manufacturer’s website:
